Jig Concentrator 2LTC-6109/8T

Jig Concentrator 2LTC-6109/8T
The jig concentrator 2LTC-6109/8T is also known as a trapezoid jigging concentrator wich is a large lateral-drive diaphragm jig concentrator with four adjustable beneficiation slots.
Download Brochure:    Brochure.rar

 Description of Jig Concentrator 2LTC-6109/8T :

The jig concentrator 2LTC-6109/8T is also known as a trapezoid jigging gravity separator wich is a large lateral-drive diaphragm jig machine with four adjustable beneficiation slots. It has a trapezoidal jigging surface with high recovery rate and handling capacity. Forui jig concentrator 2LTC-6109/8T is widely used for the ore dressing of metallic and non-metallic mineral such as hematite, limonite, gold placer, manganese ore, tungsten ore, tin, tantalum and niobium ore, mercury, fluorite ore, barite ore, celestite ore, etc.  This jig concentrator also be used to process metal smelting slag and extract the alloy particles and recyclable substances. So, it is a smelting slag recycling machine for users.

The trapezoidal jig concentrator is composed of eight jigging chambers, two columns, four rooms for each column. It gradually become wide from the mineral feeder to the discharge end, and the jig concentrator has big handling capacity, good adaptability. This product is suitable for being used in the concentration of medium and fine minerals. And the effective recovery limit is 53 microns. The gravity separator is widely used in the re-election of iron, manganese and tin in China. The water supply pipe is between two columns and supply water to the chambers.

The trapezoidal jig concentrator has big handling capacity, high recovery rate and wide workable particle size range. It is an ideal gold separator and tin processing machine for gold placer extraction and tin ore dressing.

 Advantages of Jig Concentrator 2LTC-6109/8T:

♦ Energy-saving, efficient and environmentally friendly.
♦ Trapezoidal working surface and longer ore dressing trip, higher mineral recovery, big capacity.
♦ Four jigging beneficiation slots, adjustable stroke and stroke times, wide working particle size range.
♦ Good stability, simple operation and maintenance.


 Technical Parameters:
Model
Section
Form
Column
No.
Jigging
Chamber
No.
Jigging
Area
(m2)
Stroke
Coefficient
Stroke 
(mm)
Stroke
Frequency
(T/min)
Handling
Capacity
(T/h)
Power
(KW)
2LTC
366/8T
Trapezoid
2
8
2.16
0.68-0.41
0-50
120-300
3-6
1.1*2
2LTC
6109/8T
Trapezoid
2
8
5.76
0.52-0.35
0-50
120-300
20-30
1.5*4

 Forui Tin Processing Machine:
About 253,000 tonnes of tin have been mined in 2011, mostly in China, Indonesia, Peru, Bolivia and Brazil. Tin is an important source of the metal. The recovery of tin through secondary production, or recycling of scrap tin, is increasing rapidly. So the tin processing machine is becoming badly-needed for ore dressing industry. Forui has 20-year experience in the research of tin processing machine, and you won’t fail to find the right tin processing machine in Forui. We can give you a on-site presentation with your ore sample.

Should this jig concentrator 2LTC-6109/8T or any other products be of interest to you, please do not hesitate  to contact us or complete the form below, and we will response to you as soon as possible. 


 

comments powered by Disqus
    Your Contact Details To Us    
(*)Required information
  1.