Alluvial Tin Separation

Tin is kind of silver metal with a strong of gloss and density iof 7.0, low melting point, hardness of 3.75 and great malleability. The content of tin in nature is very low and it exists in nature in form of the tetravalence compound.
 
The beneficiating of tin ore depends on nature and composition of the ore itself. At this moment, most of tin ore are from cassiterite tin deposit with its density larger than density of its inlay gangue. So the traditional beneficiation of tin ore is gravity separation. If the inlay size of the tin grain is micro fine, floatation separation can be ok to work. There is usually some iron oxide like magnetite, hematite, limonite in thn minera and this kind of tin ore is nit so easy to upgrade. Recently, magnetic separating of tin ore has been arised up  for some iron -tin to separate the iron from tin.

LTA1010/3 three-washing-box jig machine belongs to double rooms under the single plug-fuse type. It exploits water as medium and separates according to the density of the gangue minerals.
 
LTA1010/3 jig machine does the sine wave motion. It has the advantage of high recovery, large capacity of treatment and continuous working.
 
LTA1010/3 jig machine is extensively used in processing tungsten, tin, antimony, mercury, alluvial gold deposits, manganese ore, barites, fluorite, lapis lazuli, ore, pyrite, limonite and ore dressing and hematite etc all kinds of smelting slag metal recyclin
 
This magnetic separation can work combinating with floatation separation and gravity separation. In sum, the separation of tin ore has been in the new peried of different beneficiation method conbination. However, the gravity separation is still an essential beneficiation way in the tin ore processing.

For more information, please contact us directly.

Homepage/ www.frjigmachine.com
E-mail/ sales1@frjig.com